Boats    Trailers    Fishing Gear    Autos
Salt Rid is a Biodegradable Non-Toxic product which dissolves salt and leaves a protective corrosion-inhibiting coating on any surface exposed to salt water or salt air. By Incorporating Salt Rid into your regular maintenance you can add longer life to outboards, inboards, manifolds, risers, boats, jet skis, trailers and vehicles.
You can buy Salt Flush from the retailers listed in "Purchasing Outlets" or order it online below.
!
!

Salt Flush with Applicator - Mixer

Salt Flush with Applicator - Mixer
!
Now Only

Salt Flush Refill

Salt Flush Refill
!
Now Only

Dealer Salt Flush with Applicator - Mixer

Dealers Box Salt Flush with Applicator - Mixer
!
Now Only

Dealer Salt Flush Refill

Deales Box Salt Flush Refill
!
Now Only

Outboard Engines, Stern Drives, Boat Hulls and Fittings, Boat Trailers, Fishing Gear, Cars & 4WDs.

 Flush Directions

Unscrew dispenser cup from the Salt Flush applicator and fill with Salt Flush concentrate. Replace the dispenser cup, taking care to ensure that the  “O” ring is seated properly.  Attach one end of the applicator to a garden hose and the other end to your flushing attachment.  Ensure the knob of the applicator is in the “OFF” position.   Turn water flow on full pressure and start engine. Bring engine up to operating temperature to ensure that the thermostat is open for Salt Flush to clean the engine cooling system.  Turn knob to the “ON” position and continue to run through the engine for 1 minute.  Turn engine off, shut off water supply.  Remove flushing attachment and applicator. Leave Salt Flush in the engine to prevent rusting and corrosion.  Use remainder of concentrate left in the dispenser bowl to rinse off boat, trailer, fishing gear, boat fittings, and vehicle.

!